Eaton Tripp Lite Series SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 2U Rack/Tower, Network Card Options, LCD, USB, DB9, 6 Outlets - 1000VA/800W - 5.3 Minute Full Load - 6 x NEMA 5-15R
- Corrects under- and overvoltages from 83V to 147V
- 6 NEMA 5-15R outlets-4 switchable via network interface
- Network power management and control capability
- Interactive LCD monitoring screen
- 15 min. runtime at half load; 5.3 min. at full load
Description
Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
- Audible alarm signals loss of utility power, overload, low battery and fault conditions
- 6 NEMA 5-15R outlets
- 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
- 570-joule surge suppression rating
Reliable Battery Backup
- Supports half load up to 15 min. and full load up to 5.3 min.
- Internal batteries designed for hot-swap field replacement
- 95% line-power efficiency rating saves money in energy costs
Switchable Outlets
- 2 load banks, each with 2 outlets controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
- Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
Interactive LCD Screen
- Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
- Rotates for easy viewing in rack-mount or tower configurations
Network Management Cards
- Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
Communications Ports
- USB and DB9 ports combine with PowerAlert software, available via free download, to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
- EPO port supports emergency shutdown in large facilities
Versatile Installation Options
- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
- Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
Specifications
UNSPSC Code
39121011
Alarm
On Battery
Backup/Run Time (Full Load)
5.30 Minute
Backup/Run Time (Half Load)
15 Minute
Battery Chemistry
Lead Acid
Brand
Tripp Lite series
Brand Name
Tripp Lite series
Category
General Purpose UPS
Certifications & Standards
UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Cord Length
10 ft
Country of Origin
Taiwan
Depth
12.5"
Emergency Power OFF
Yes
Height
3.5"
Hot Swappable
Yes
Input Voltage
120 V AC
Limited Warranty
3 Year
Load Capacity (VA)
1000 VA
Load Capacity (Watt)
800 W
Manufacturer
Eaton Corporation
Manufacturer Part Number
SMART1000RM2U
Manufacturer Website Address
http://www.eaton.com/EatonCom/Markets/NorthAmerica
Maximum Operating Temperature
104°F (40°C)
Network Management
SNMP Manageable
Output Voltage
120 V AC
Package Contents
- SMART1000RM2U UPS System
- PowerAlert Software CD
- Serial & EPO Cabling
- 4 x Post Rackmount Installation Kit
- Instruction Manual
Plug/Connector Type
NEMA 5-15P
Product Family
SmartPro
Product Line
SmartPro
Product Name
SMART1000RM2U UPS System
Product Type
Line-interactive UPS
Rack Height
2U
Receptacle Detail
6 x NEMA 5-15R
Receptacle Type
NEMA 5-15R
Software Included
PowerAlert Software
Total Number of Expansion Slots
1
Typical Battery Recharge Time
4 Hour
USB
Yes
Waveform Type
Sine Wave
Weight (approximate)
35.40 lb
Width
17.5"
Compare
Eaton Tripp Lite Series SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 2U Rack/Tower, Network Card Options, LCD, USB, DB9, 6 Outlets - 1000VA/800W - 5.3 Minute Full Load - 6 x NEMA 5-15R
- Corrects under- and overvoltages from 83V to 147V
- 6 NEMA 5-15R outlets-4 switchable via network interface
- Network power management and control capability
- Interactive LCD monitoring screen
- 15 min. runtime at half load; 5.3 min. at full load