- Protects equipment against blackouts, brownouts, transient surges and line noise
- Keeps equipment running during outages to allow time for file saves and safe shutdown
- Unity power factor ensures maximum power possible at each power rating
- For remote monitor and control, the WEBCARDLXE is required (sold separately). Not compatible with WEBCARDLX.
- 2-line front-panel LCD with 10 selectable screens reports detailed UPS and site power info
Description
Reliable Battery Backup Keeps You Operational Through Power OutagesThe field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting.
Optional LX Platform Network Management Card Allows Remote Access 24/7The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
NEMA Outlets Protect Your Connected ComponentsOne L5-30R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage ConditionsAVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART3000RM2U maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform BetterThis UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
Specifications
39121011
Remote Shutdown
Data storage
3 Minute
9 Minute
Valve-regulated
Lead Acid
Tripp Lite series
Tripp Lite series
General Purpose UPS
10 ft
Philippines
72 V DC
23.7"
LCD
Yes
Yes
Restriction of Hazardous Substances (RoHS)
Yes
Yes
Rack/Tower
3.4"
Yes
24 A
120 V AC
3 Year
3000 VA
3000 W
Eaton Corporation
SMART3000RM2U
http://www.eaton.com/EatonCom/Markets/NorthAmerica
10000 ft
104°F (40°C)
32°F (0°C)
SNMP/Web
60 Hz
1
100 V AC
Yes
1 each
Single Phase
NEMA L5-30P
SmartPro
SmartPro
SMART3000RM2U
Line-interactive UPS
Over Voltage
2U
6 x NEMA 5-20R
NEMA L5-30R
No
Yes
Yes
PowerAlert Software
5 Front Panel Leds:
- Green Power Led
- Green Voltage Correction Led
- 3 Color Battery Charge Led
- 3 Color Output Load Led
- Red Battery Warning Led
5°F (-15°C) - 122°F (50°C)
380 J
4 ms
4.50 Hour
Yes
Yes
Pure Sine Wave
17.2"
