Eaton Tripp Lite Series Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Blue, 7 ft. (2.13 m) - 7ft - 1 x RJ-45 Male - 1 x RJ-45 Male - Blue
- Meets Category 6 cabling standards.
- Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, and ETL (Category 6, draft 11)
- Drastically reduce impedance and structural return loss compared to standard 100Mhz wire.
- Snagless boots protect the locking tabs on the RJ45 connectors from being damaged during installation
- Feature molded connectors with integral strain relief. Rated for 550 MHz/1 Gbps communication
Description
This category 6, molded patch cable lets you stay ahead of the game by using a high-speed cable to distribute data, voice and video. Cable delivers stable performance up to 550MHz. High-quality copper wire and a staggered-pin plug design keep near-end cross-talk levels to a minimum. Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation. 7' cable is designed for use in category 6, category 5e and category 5 applications.
Specifications
26121609
Limited Lifetime warranty
24 AWG
Snagless
Tripp Lite series
Tripp Lite series
Patch Cable
7 ft
Category 6
Connector Cables
- IEEE 802.3ab
- IEEE 802.5
- ANSI/EIA/TIA 568
- ISO/IEC 11801
- ETL (category 6 draft 11)
Blue
Copper
1 x RJ-45 Network - Male
1 x RJ-45 Network - Male
RJ-45 Network - Male
RJ-45 Network - Male
Gold
China
1 Gbit/s
Network Device
Restriction of Hazardous Substances (RoHS)
Yes
Damage Resistant
Blue
Polyvinyl Chloride (PVC)
CM
Lifetime
Eaton Corporation
http://www.eaton.com/EatonCom/Markets/NorthAmerica
Copper - Conductor
4
1 / Bag
Blue
Copper
N201-007-BL
Cat.6 UTP Patch Network Cable
Network Cable
Non
9"
3.68 oz
7"
Eaton Tripp Lite Series Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Blue, 7 ft. (2.13 m) - 7ft - 1 x RJ-45 Male - 1 x RJ-45 Male - Blue
- Meets Category 6 cabling standards.
- Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, and ETL (Category 6, draft 11)
- Drastically reduce impedance and structural return loss compared to standard 100Mhz wire.
- Snagless boots protect the locking tabs on the RJ45 connectors from being damaged during installation
- Feature molded connectors with integral strain relief. Rated for 550 MHz/1 Gbps communication