APC NetShelter Switched Rack PDU, 0U, 20A/208V, 16A/230V, 7 C13 and 1 C19 outlets - Switched - IEC 60320 C20 - 200 V, 208 V, 230 V - 0U - Vertical - Rack-mountable - Tower
Description
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Specifications
39121017
APC
APC
PDUs
India
1.8"
Restriction of Hazardous Substances (RoHS)
Yes
United States
Tower
38.9"
200 V
2 Year
Protocols:
- Web
- SNMP
- Telnet
- Command Line Interface
Schneider Electric SA
AP8958
http://www.schneider-electric.com
Rack-mountable
Vertical
No Preference
100 V AC
Switched
Side
IEC 60320 C20
NetShelter
AP8958
Switched Rack AP8958 8-Outlets PDU
Switched
No
PDU
0U
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
7.12 lb
2.2"